How to Take Apart a Razer Deathadder Elite

When you decide to take apart your Razer Deathadder Elite, it's important to handle the process with care to avoid damaging its intricate components. Begin by gently peeling off the mouse feet to expose the screws beneath, which you'll need to unscrew using a Phillips #00 screwdriver. The challenge often lies in safely detaching the top cover from the base without tugging on the delicate ribbons connected to the circuit board. What you find inside might surprise you, and understanding how to manage these components effectively can greatly enhance both the lifespan and performance of your mouse. Curious about the next steps? Let's explore what it takes to navigate the internal maze of your gaming device.

Gather Required Tools

Before you begin disassembling your Razer Deathadder Elite mouse, you'll need to gather a few essential tools. Foremost, a Phillips #00 screwdriver is important because it fits the specific screws used in your mouse. Make sure the screwdriver is in good condition to avoid stripping the screws.

Next, considering the focus of the repair might be the wheel mechanism, having a replacement scroll wheel ready is advisable. This is especially true if you've noticed issues with the mouse wheel, such as sticking or inconsistent scrolling, which are common faults that necessitate wheel replacement.

Since the disassembly process demands precision and patience, prepare a clean workspace. A small container or a magnetic mat can be very helpful to hold the screws once you remove them, preventing any from getting lost.

Remove Mouse Feet

First, you'll need to locate the mouse feet on the bottom of your Razer Deathadder Elite; they're typically round or oval pads.

For removal, gather a thin, flat tool like a spudger or a small flathead screwdriver to gently pry the feet away without tearing them. Apply steady, controlled force to lift each foot, ensuring you don't damage the adhesive or the surface underneath.

Identify Mouse Feet Location

Locate the mouse feet on the underside of your Razer Deathadder Elite; these small, adhesive pads are essential for smooth operation. To make sure you're working properly, follow these detailed steps:

  1. Visual Inspection: Check each mouse foot carefully for its shape and position. They're typically located at each corner of the mouse's bottom side.
  2. Note the Edges: Identify where each foot begins and ends. This is important as you'll need to know these boundaries when you remove them.
  3. Feel the Adhesive: Gently run your finger along the edge of the mouse feet to understand how firmly they're attached. This will help you estimate the effort needed for removal without damaging them.

Tools for Feet Removal

To begin removing the mouse feet from your Razer Deathadder Elite, gently warm the adhesive with a blow dryer, setting it on low to avoid overheating. This step is essential as it softens the glue, making the feet easier to peel off without tearing.

Once you've sufficiently heated each foot, use a thin, flat tool—such as a spudger or a small flathead screwdriver—to carefully lift the edges of the feet. Insert the tool under the foot and slowly pry up, ensuring you don't damage the foot in case you need to reattach it later.

This process exposes the screws hidden underneath, which are vital for further disassembly and accessing the internal components.

Safe Removal Techniques

After warming the adhesive, gently lift the edges of each mouse foot with your tool to safely expose the screws beneath. Here's a step-by-step guide to make sure you're doing it right:

  1. Heat the Adhesive: Use a blow dryer on a low setting to warm the adhesive under the mouse feet for about 30-60 seconds. This softens the adhesive, making the feet easier to remove without tearing.
  2. Lift Carefully: Start at one corner of each foot. Insert a thin, flat tool—like a spudger or guitar pick—under the edge and slowly lift. Work your way around to avoid ripping the foot.
  3. Access and Store Screws: Once removed, keep the screws in a small container to prevent loss. After maintenance, reattach each foot firmly to preserve the mouse's functionality.

Detach Mouse Cover

To begin detaching the mouse cover, you'll first need to identify and locate the screws that secure the cover.

Start by carefully removing the upper screws using a Phillips #00 screwdriver; these are typically found beneath the coverings you've previously pried off.

Make sure you're working on a stable surface to avoid slipping and potentially stripping the screws.

Identify Cover Screws

Begin by identifying and removing the cover screws located beneath the Razer Deathadder Elite mouse using a Phillips #00 screwdriver. Here's how to proceed:

  1. Locate Hidden Screws: Check under all labels and pads. A product sticker often conceals an important screw at the bottom. You'll need to gently pierce the sticker to access it.
  2. Unscrew Carefully: Use the correct screwdriver to avoid stripping the screws. Turn them counterclockwise and apply steady pressure.
  3. Organize Screws: As you remove each screw, place them in a small container or on a magnetic mat. Keeping them organized is key to avoid losing any during the process of disassembly.

Removing Top Safely

Once you've removed all the screws, carefully lift the top cover of your Razer Deathadder Elite mouse to expose the internal components.

Start by gently prying under any edge of the cover using a thin, flat tool. This is extremely important you do this slowly to avoid snapping any hidden attachments.

As you lift the cover, keep an eye on any wires or connectors that may be attached to the cover and the main body of the mouse. Disconnect these cautiously, if necessary.

Disconnect Internal Components

Carefully unplug the wired connectors from the circuit board of your Razer Deathadder Elite to start disconnecting its internal components. You'll need to proceed with caution to avoid damaging the delicate parts.

Here are the steps to guarantee you disconnect the internal components safely and effectively:

  1. Identify Connectors: Locate each wired connector attached to the circuit board. These are typically small, plastic, and may have a locking mechanism which should be gently disengaged.
  2. Use Proper Tools: Employ a pair of tweezers or a small flat screwdriver to carefully lift the connectors. Apply minimal force to avoid bending or breaking the pins. Gently wiggle the connector to ease it out if resistance is felt.
  3. Organize Components: As you remove each connector, label them or place them in a designated storage area. This organization will help you in keeping track of each component, ensuring none are misplaced and making the reassembly process smoother.

Clean and Repair Internals

After disconnecting the internal components, proceed to clean and repair the internals of your Razer Deathadder Elite by first removing any dust or debris from the circuit board and surrounding areas. Use a soft brush or compressed air to gently clear off the surface. Make sure you're handling the board delicately to avoid any damage.

Next, inspect for any broken pins or loose connections. If you find a broken pin, you can attempt a careful fix using a straightened paper clip. Gently manipulate the pin back into position, but be cautious not to apply excessive force which might cause further damage.

Once you've addressed any physical issues, check all the connectors. Confirm each connection is clean and free from debris. Use a small amount of isopropyl alcohol on a cotton swab to clean the contact points if they appear dirty or oxidized. This step is important to ensure that all connections will function reliably once you reassemble the mouse.

After cleaning and repairing, give everything another quick inspection to make sure no parts were missed and that everything looks in order. This thorough check helps prevent issues when you put your mouse back together.

Reassemble and Test Mouse

Begin reassembling your Razer Deathadder Elite by placing the motherboard back into its slot and securely reconnecting all necessary connectors. Make sure every connector snaps back firmly to avoid any loose connections that could affect the mouse's functionality.

Here are the next important steps:

  1. Reattach the Top Shell: Carefully align the top shell with the bottom part of the mouse. Confirm it fits perfectly before you proceed to screw it back together. Use the appropriate screwdriver to tighten the screws, ensuring the shell is snug and secure.
  2. Cleaning with Air Duster: Before finalizing the assembly, use an air duster to remove any dust particles that might've settled during the repair process. Aim the duster both inside and around the external shell, focusing on the crevices where dust accumulates.
  3. Final Testing: Once reassembled, connect your mouse to your computer to test all functions. Verify that all buttons click properly and that the scroll wheel moves smoothly. Check the cursor movement on your screen to make sure it responds accurately to the mouse's movement.

These steps will help you achieve a fully functional Razer Deathadder Elite, ready for gaming or any task at hand.


Now that you've disassembled your Razer Deathadder Elite, cleaned its components, and put everything back together, it's important to test its functionality.

Connect the mouse to your computer and make sure all buttons and the scroll wheel operate smoothly.

If any issues arise, double-check your connections and alignments.

Regular maintenance will keep your mouse performing at its best.

Enjoy enhanced gaming precision and reliability from your well-maintained Razer Deathadder Elite.